STKM13C is a type of cold drawn seamless carbon steel tube defined under JIS G3445, the Japanese standard for machine structural carbon steel tubes. It is widely used for hydraulic cylinder barrels, machinery frames and general mechanical parts. Many hydraulic cylinder manufacturers choose this grade for its balanced strength and good machining performance.

What does STKM13C stand for
The name STKM follows the naming rule of JIS G3445. STK means steel tube, M stands for machine structure. Number 13 refers to the material grade, and the last letter C indicates that the tube has gone through full cold drawing and heat treatment. Compared with STKM13A and STKM13B, STKM13C has better dimensional accuracy and more stable mechanical properties.
Mechanical properties of STKM13C
STKM13C has a minimum tensile strength of 510 MPa and a minimum yield strength of 325 MPa. It can be easily honed, skived and roller burnished to get smooth inner surface, which is critical for hydraulic cylinder applications. It supports welding and bending, but you need to control the heat input during welding to avoid deformation.
It is not a high-alloy steel. Its chemical composition is simple carbon steel, so it is more cost-effective than alloy steel such as 42CrMo4. But it cannot work under extremely high pressure or heavy impact for long-term use.
Common applications of this JIS G3445 tube
The most popular use of this JIS G3445 tube is hydraulic cylinder honed tube. After honing, the inner surface can reach H8 or H9 tolerance, suitable for medium-pressure hydraulic cylinders. It is also used for machinery support shafts, guide sleeves and general mechanical structural pipes.
Many buyers from construction, agriculture and material handling industries source this material for cylinder production. If you need higher wear resistance, you may consider alloy steel tubes instead.
STKM13C vs ST52 / E355
A lot of customers ask about the difference between STKM13C and ST52 (E355). They have similar strength levels, but they follow different standards. STKM13C follows JIS G3445, while ST52 is a DIN standard material. Their tolerance and inspection rules are different. When you replace one with the other, you need to check your drawing requirements carefully.

Buying tips for STKM13C tubes
When purchasing STKM13C seamless tubes, confirm the OD, ID, wall thickness and surface treatment first. Honed tubes are the most common variant for cylinder use. You should also ask for material test certificate (MTC) to verify chemical and mechanical data.
Reference Resources
- Nippon Steel official specification for JIS G3445
- AZoM steel material database
- Japanese Standards Association